video projector stands: find the right stand for your home theater setup

by:XY Screens     2019-11-23
You have new Affordable projectors and you may be looking at the projector stand to make your new home theater look professional and stylish.
Below, we\'ll take a look at a few options on Amazon and what scenarios they are best suited.
Hopefully we can find the right booth for your needs so that you can throw away a stack of books and boxes that the projector currently has on it.
The first video projector stand I want to show is Da-Lite Gigant.
This solution is a solid choice for those who are not committed to permanent theater setup or do not like drilling.
In addition to the sturdy construction, one feature of this folding bracket is the two shelves of different levels.
This will give you a little more flexibility when placing your projector to get the right height.
In addition, free shelves can be used to install DVD, Blu-ray
Ray or other media player
I\'m a little scared by this option, but I\'m sure there are cases where someone might want to put the projector on the wheel.
Maybe your room is small and you want to roll it into a corner when the projector is not in use.
Whatever the case, Artograph mobile projector floor stand may be exactly what you need to get your home theater set up to work.
The obvious drawbacks include finding out how to deal with the video and power cord to and from the projector.
Maybe you connect the video projectors every time you scroll them in place?
Also, keep in mind that every time you move your device, you have to re-
Set focus, projection angle, etc.
For those who are not afraid to drill holes in the wall and install more permanent installations, wall hanging can be an attractive solution.
The OmniMount ECSB component shelf is rated at 30 pounds, which is very powerful for any consumer projector.
The downside of this solution is that it is just a beautified shelf.
Your projector is just on the shelf and is not connected in any way.
This may not prevent you from improvising solutions such as using some double-sided mounting tape, but keep in mind that if you don\'t connect the projector in some way, it\'s only a bump away from falling to the ground.
The benefit of the shelf solution is that if you need to move the projector for any reason, it is easy to remove, but in other ways it is a fairly permanent solution.
When we started looking for professional and permanent solutions, the ceiling bracket was the golden standard for the video projector bracket solution.
Extinct PRS series PRSE-
EXB may be one of the more expensive options, but will be the most flexible and sturdy.
This is a permanent, professional solution, but you will pay extra for it.
The ceiling is cheap some people don\'t cut the price by $200 on the video projector stand, and some projectors may not be worth it.
For low-end, more compact budget projectors, this universal ceiling installation may do a good job.
It looks a little cheaper and may use a nice pot of flat black paint to avoid pain in the eyes, otherwise the work should be done.
Finally, for those who don\'t have a high ceiling, something more low-key will work.
The Pmpm1u40 Universal Projector Ceiling bracket will be available for people with lower ceilings.
Remember that the only problem with these low-key installations is that they will put your projector in all the trapped heat in the room, some fans on your projector are working overtime to vent from the hot interior.
If your room is not well ventilated, you may experience excessive ventilationheating issues.
This is not a guarantee, it is something that needs attention.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...